Siemens A53457 Installation & Maintenance

INSTALLATION AND CONFIGURATION2-42Document No.: COM-00-05-16 June 2006, Revised June 2014Version: C.1The user will be returned to the Second Configuration Menu.3. Prior to exiting the First Configuration Menu, select “Save changes then restart” to savechanges and restart the WAG.2.6.28 Persistent Serial TunnelEach WAG is provided with the IP address or symbolic name of the remote WAG using the“Persistent Serial Tunnel” configuration option. If the first byte of the IP address is configured with0, the PST functionality is disabled.The value defaults to DISABLED.To change the Persistent Serial Telnet IP Address or Symbolic Name:1. On the Second Configuration Menu, select “Persistent Serial Tunnel” Telnet IP Address orSymbolic Name to be changed. The Change Persistent Serial Telnet IP Address screen appears.Figure 2-58. Change Persistent Serial Telnet IP Address Screen2. Do one of the following:a. To change or enter the IP Address, select “Enter an IP address” option number and pressENTER. Go to step 3.b. To change or enter the Symbolic Name, select “Enter a Symbolic name” option numberand press ENTER. Go to step 4.c. To disable the Persistent Serial Telnet function, select “Disable Persistent Serial Telnet IPAddress” option number and press ENTER. The user will be returned to the SecondConfiguration Menu. Go to step 5.d. To exit the Persistent Serial Telnet function without making changes, select “Exit without achange” option number and press ENTER. The user will be returned to the SecondConfiguration Menu. Go to step 5.3. From the screen in figure 2-59, do one of the following: