Siemens A53457 Installation & Maintenance

OPERATION3-14Document No.: COM-00-05-16 June 2006, Revised June 2014Version: C.1This indicates the IP address of the symbolic name that has successfully been looked up in theDNS server.DNS: Asking XXX.XXX.XXX.XXX for [symbolic.name]This indicates that the WAG is sending a DNS request to the IP address of the indicated DNSserver asking for the IP address of the symbolic name.DNS: Primary Failed for [symbolic.name]This indicates the primary DNS server did not have an entry for the indicated symbolic name.DNS: Secondary Failed for [symbolic.name]This indicates the secondary DNS server did not have an entry for the indicated symbolic name.Time Stamp on TraceThe A01E release or later release of the executive software will have the time stamps added to thetrace reports that the operator can request. Each trace has an accompanying timestamp so that itis easier for an operator to see when things happen.3.12 SETTING THE CURRENT DATEThe sdate command provides the WAG the current date. If the user types the sdate commandwithout any arguments, the WAG will display the acceptable syntax for setting the current date.Type sdate followed by the date in DD.MM.YY format and then press Enter.3.13 SETTING THE CURRENT TIMEThe stime command provides to the WAG the current time. If the user types the stimecommand without any arguments, the WAG will display the acceptable syntax for setting thecurrent time.Type stime followed by the time in HH.MM.SS format and then press Enter.3.14 UPLOADING/DOWNLOADING FILESThe xfiles command allows the user to upload or download files to/from the WAG. The use ofthe file transfer menu provides an easy method for installers to load the WAG with software. Referto Section 5 for more information on this function.