Samsung Officeserv 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 SPECIAL APPLICATIONSTECHNICAL MANUAL PART 2 APRIL 20072.7.4Digits Destination Delete Reason2044 RP1~RP6 = B 0 Intercom Calls to2144 RP1~RP6 = B 0 Switch 0012244 RP1~RP6 = 22 2 ICM to 002 from 0032344 RP1~RP6 = 23 2 ICM to 003 from 0025044 RP1~RP6 = B 0 Intercom to 001 groups5144 RP1~RP6 = 51 2 Calls to 002 groups5244 RP1~RP6 = 52 2 Calls to 003 groups561 RP1~RP6 = 9 1 tandem local callsWhen the 10 steps described above have been completed intercom networkingis completed.Centralized Voice Mail SetupThis setup takes place at each of the remote locations and allows these locations touse the Samsung Voicemail system in the central location. When messages are left atthe central location the VMMSG key at the remote location will illuminate to indicate amessage. The “new message” counter will not be shown in the keyset displays at theremote location. When the message is returned to the Samsung Voicemail by pressingthe VMMSG all navigation must be done by following the audio prompts and dialingdigits as the interactive soft keys will not be shown at the remote location.1. In MMC 825 set the “USE REMOTE VM” option to YES2. In MMC 825 program the station group for the Samsung Voicemail in themain location under “REMOTE VM NUMBER” e.g. 50-493. Confirm that at the main location that the entries in MMC 824 that requirevoice mail boxes have the MB: option set to Y so that when a VM downloadis performed these mailboxes and extension id’s will be automaticallycreated.Centralized Operator SetupThis setup allows all dial ”0” calls in the remote system to call the operator in the mainsystem. This feature only works with dial “0” calls. Recalls etc. will ring the designatedlocal operator.1. In MMC 724 under NTWK LCR NUMPLAN make an entry “0”, for example:[NTWK LCR NUMPLAN][LCR-03:NONE→0 ]2. In MMC 824 for the “0” entry fill out the display as 0010,1,04,N for example:[03:0 →0010 ][SZ:1 MAX:04 MB:N]