Samsung Officeserv 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

OfficeServ 7100 SPECIAL APPLICATIONSTECHNICAL MANUAL PART 2 JANUARY 20092.6.26ITP Application Programming ExamplesIn the following example shows the private corporate LAN application on the enterprisenetwork. The network is considered “private” because all of the IP addresses are onthe same network. In the following example the IP addresses are “static” and wereprovided by the IT person that manages the IP network.Programming this application on the OfficeServ 7100 system is as follows:1. MMC 830 ETHERNET PARAMETERSNote: If you are using on-board MGI channels MMC 831 is “read only”. TheMP10/MP10a’s IP will be used for the MGI function also)• SYSTEM IP ADDR: 105.52.10.100 (MP10/MP10a IP address)• SYSTEM GATEWAY: 105.52.10.1• SYSTEM NET MASK: 255.255.255.0• SYSTEM RESTART: Yes• SYSTEM IP TYPE: PRIVATE (default)2. MMC 831 MGI PARAMETERS (If you are using the MGI-16 card)Note: If you are using on-board MGI channels MMC 831 is “read only”. TheMP10/MP10a’s IP will be used for the MGI function also)• IP ADDRESS: 105.52.10.101• GATEWAY: 105.52.10.1• SUB MASK: 255.255.255.0• PUBLIC IP: Not Applicable (default 1.1.1.1)Router/Hub MP10/MP10A105.52.10.100MGI105.52.10.101IP: 105.52.10.1Subnet:255.255.255.0105.52.10.54105.52.10.150Extension 3201105.52.10.151Extension 3202