Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 841No Option Description Default8 ITP TX GAIN/MIC Sets IP-based phone MIC gain value of each level. -9 ITP RX GAIN/SPKR Sets IP-based phone SPKR gain value of each level. -Sets IP-based phone software upgrade option with thesystem. Used for automatic software upgrades.-0 TYPE: Sets IP-based phone software upgrade type..a) MMC COMMAND: IP-based phone software upgradedmanually in MMC 840.b) PHONE CON: IP-based phone software upgradedautomatically at phone connection.c) AUTO TIME: IP-based phone software upgradedautomatically at set time.MMCCOMMAND1 START TIME: IP-based phone software automatic upgradestart time.0000.(Disable)10 ITP VERSUPGRADE(“PHONE TFTP IP”and “PHONEVERSION” must beset).2 INTERVAL: IP-based phone software automatic upgradeinterval time.10 seconds.11 MGI ALIVE PERIOD Time interval between heart beat check between MGI andMP10.-12 FEATURE LICENSEKEYSoft phone license key NONESOFTP ALLOW 0SOFTP USED 0SOFTP CONN 013 FEATURE LICENSESTATUSNEWS ALLOW (not supported in US) NO14 DATACARD IPC MP10 to data module IPC communication YES15 MP MGI/VM KEYLICENSE KEYMGI License Key Entry.(For on-board MGI channels andvoicemail).BLANK16 MP MGI/VM STATUS MGI & VMS License Key Status: NO LICENSE KEY, MGIALLOW: VMS ALLOW.Shows number of MGI channels and voicemail ports enabledby the license above.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMC