Samsung OfficeServ 7100 Technical Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 852ALMNO.ALMCODE ALARM DEFINITION64 MNF04 Trunk FaultOut of service trunk detected via loopdetect. Internal CODEC test.Alarm Data = Cabinet-Slot Port (C1,2)-(S1 through 10), (P1 through 16)65 MNF05 Trunk RecoveryOut of service trunk detected via loopdetected as out of service is nowoperational.Alarm Data = Cabinet-Slot Port (C1,2)-(S1 through 10), (P1 through 16)66 MNF06 Trunk DisconnectOut of service trunk detected via seizureof trunk. External seizure test.Alarm Data = Cabinet, Slot Port (C1,2)-(S1 through 10), (P1 through 16)67 MNF07 Trunk ConnectOut of service trunk recovered viaseizure of trunk External seizure test.Alarm Data = Cabinet, Slot Port (C1,2)-(S1 through 10), (P1 through 16)68 MNF08 SIO TXQ Over SMDR buffer above 80% capacity.69 MNF09 SIO TXQ Under SMDR buffer below 80% capacity.70 MNF10 T1 Out of Service A digital line is out of service71 MNF11 T1 In ServiceDigital line has been restored to normalservice.Alarm Data = Cabinet,Slot (C1-2,S1through 10)72 MNF12 SIO Out IO port has lost DTRAlarm Data = SIO 1 through 673 MNF13 SIO In IO port has regained DTR.Alarm Data = SIO 1 through 674 MNF14 TODC Error Time of Day Clock in the MCP haserred.75 MNF15 TSW Over AlarmTSW has been requested to exceed thecapacity of available time slots.Maximum 192 per cabinet.Alarm Data = Cabinet, Slot (C1,2) (S1through 10)76 MNF 16 PSU AlarmIndicates there are over 96 ports in acabinet with a single DPCU and morepower is required. ( DLI,SLI ports)Alarm Data = Cabinet (1,2)77 MNF 17 PSU Alarm RecA second DPCU has been recognizedwhen added after alarm condition ofAlarm Data = Cabinet (1,2)78 MNF 18 SLI FaultAn SLI card has been detected as out ofservice via an internal CODEC test.Alarm Data = Cabinet, Slot Port (C1,2)(S1 through 10)(P1 through 24)