OfficeServ 7100 PROGRAMMINGTECHNICAL MANUAL PART 2 APRIL 2007MMC: 8057 VOIP WLAN Adjusts sensitivity from VOIP C.O. Tx to WLAN Rx0 SVM DGP Adjusts sensitivity from SVM Tx to digital phone Rx1 SVM SLT Adjusts sensitivity from SVM Tx to normal station Rx2 SVM ATRK Adjusts sensitivity from SVM Tx to analog C.O. Rx3 SVM DTRK Adjusts sensitivity from SVM Tx to digital C.O. Rx4 SVM ITP Adjusts sensitivity from SVM Tx to ITP Rx5 SVM VOIP Adjusts sensitivity from SVM Tx to VOIP C.O. Rx6 SVM SVM Adjusts sensitivity from SVM Tx to SVM Rx67 SVM WLAN Adjusts sensitivity from SVM Tx to WLAN Rx0 WLAN DGP Adjusts sensitivity from WLAN Tx to digital phone Rx1 WLAN SLT Adjusts sensitivity from WLAN Tx to normal station Rx2 WLAN ATRK Adjusts sensitivity from WLAN Tx to analog C.O. Rx3 WLAN DTRK Adjusts sensitivity from WLAN Tx to digital C.O. Rx4 WLAN ITP Adjusts sensitivity from WLAN Tx to ITP Rx5 WLAN VOIP Adjusts sensitivity from WLAN Tx to VOIP C.O. Rx6 WLAN SVM Adjusts sensitivity from WLAN Tx to SVM Rx77 WLAN WLAN Adjusts sensitivity from WLAN Tx to WLAN RxThere are four types of tone sensitivity adjustment as shown below:0 +0. 0 No adjustment.1 +1. 9 Up 1. 9 dB2 - 6. 0 Down 6. 0 dB3 - 2. 5 Down 2. 5 dB3. R2 LEVEL CONTROL : Adjust R2MFC signal detection0. THRESHOLD1. TX LEVEL2. RX LEVELPROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMC