5. Parameters 5-735.8.5.2 Output terminal function during fault retry : P4.02ParameterNo. Name Unit Settingrange FactorySettingChangeable duringoperationP4.02 Output TerminalFunction at Retry - 0~1 0P4.02 can be used when the multi-function output terminal settingfunction is ‘default output’ (H1.01)• SettingSettingconstant Function0 Do not output fault restart (fault contact does not operate)1 Output fault restart (fault contact operates)5.8.5.3 Fan error : P5.01ParameterNo. Name Unit SettingrangeFactorySettingChangeableduringoperationP5.01 Fan Error - 0~1 0P5.02 can be used to enable or disable the fan error detecting function.• SettingSettingconstant Function0 Enabled (fan error is detected)1 Disabled (fan error is not detected)5-74 MOSCON-E7 User’s Manual5.9 Error MonitoringInformation on the previous error can be monitored from U1 and U2• U1-displays the information on the last error.• U2-displays up to last four errors.(refer to parameter description for more details)
