5. Parameters 5-7Figure 5.1 Parameter setting methodU(Monitor)-Parameter groupB(Basic)-Parameter groupF(Frequency)-Parameter groupS(System)-Parameter groupC(Control)-Parameter groupH( /O)-Parameter groupP(Protection)-Parameter groupX 0-SubgroupX 1-SubgroupX n-SubgroupX : U, B,, F, S, C, H, PXY-01 ParameterXY-02 ParameterXY-n ParameterY : 0, 1, 2 ~ ValueChanging the Group Changing the SubgroupChanging the Parameter Numberxxx.x(Parameter-Setting value)*Change the numberusing the up/down key*Change the digitusing the shift keyData Changing ModeDATASET5-8 MOSCON-E7 User’s Manual5.1.2 Monitoring function settingLetter or number in bold on display indicates that it is blinking. Onlythe blinking letter or number can be changed. Next digit has to beselected using the shift key ( ) to move to another group andsubgroup.Figure 5.2 Selecting monitoring group (U)When or is pressed from group U, next or previous subgroupis displayed.Since U has a monitoring function and the setting can not be altered,can not be functioned to change the constant as in other groups.SET0.00 (U0.01)0.01U0.U .01Power ONDATASETDATASET
