• Tighten all terminal screws of the main circuit and the controlcircuit.• Check if the voltage of the inverter rated voltage satisfies with theAC power supply voltage.Otherwise, it may cause fire or injury• Do not perform withstand voltage test on the inverter. It maydamage the semi-conductor element.• When wiring other devices read their manuals carefully. Samsungis not responsible for any accident resulting from user’scarelessness.If not, it may cause injury or fire.• Do not connect electromagnetic switches or contactors to theoutput circuits.• Never connect an AC power supply to output terminals U/T1,V/T2, and W/T3.Otherwise, it may damage the internal circuits of the inverter.• Never short or ground output terminals: the output terminalsshould not be touched with bare hands and also, the output wiresshould not have contact with the inverter caseOtherwise, an electric shock or grounding may occur• Do not connect a phase advancing capacitor or LC/RC noise filterto an output circuit.Otherwise, it may damage the inverter or cause a fire.• Do not connect an electromagnetic switch or MC to an outputcircuit.Otherwise, it will actuate the over current protective circuit in theinverter.• Do not disassemble the digital operator.Otherwise, it may cause a personal injury.CAUTION!Parameter setting• Set the appropriate parameter. If not, it will not operate or triggerthe protection operation.• Record the previous parameters (even though Moscon-E7 recordsthe information of the last parameter), the records can be usefulin case of malfunction or errors.• When changing the parameters, make small change at a timeespecially when controlling the motor parameter, changing theV/f or max. output frequency. If not, it may damage theinverter and motor.CAUTION!Safety precautionsMOSCON E-7 User’s Manual