Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 410 ASSIGN DISA TRUNKDESCRIPTION:Allows the system the ability to have Direct Inward System Access (DISA). Because there is apossibility that unauthorized calls will be made via this feature, several safeguards have been added.The end user must be informed of these to prevent unnecessary service calls. DISA can lock outwhen a predetermined number of invalid consecutive calls are attempted. Callers will then receiveerror tone until the programmable timer has expired. The [ key may be used to initiate new dial tonewhile in a station to station call. The # key may be used to terminate the DISA call and disconnectthe central office line. Only one central office call will be allowed per DISA call but multiple intercomcalls are possible.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALL (trunks)FEATURE KEYS0 NORMAL No DISA service1 DAY In day mode DISA is available2 NIGHT In night mode DISA is available3 BOTH In day and night mode DISA is availableACTION DISPLAY1. Press TRSF 410Display shows[701] DISA LINENORMAL2. Dial trunk number ( e.g., 704)ORPress UP or DOWN key to select trunk and press RIGHTsoft keyORPress ANS/RLS key to select all trunks[704] DISA LINENORMAL[ALL] DISA LINE?3. Dial an option (0–3) from above tableORPress UP or DOWN key to select trunk andpress RIGHT soft key to return to step 2[704] DISA LINENIGHT4. Press TRSF to store and exitORPress SPK to store and advance to next MMC