Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 401 C.O./PBX LINEDESCRIPTION:Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows PBX access codes tobe recognized, thus allowing more complete toll restriction. This mode is assigned on a per-trunkbasis. If a trunk requires the use of the RECALL key, it must be set to PBX mode.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 401Display shows[701] PBX LINECO LINE2. Dial trunk number (e.g., 704)ORUse UP or DOWN to scroll through trunk numbers andpress RIGHT soft key to move cursorORPress ANS/RLS to select ALL[704] PBX LINECO LINE[ALL] PBX LINE?3. Dial 1 for PBX or 0 for COORUse UP or DOWN to scroll through optionsPress RIGHT soft key to return to step 2 above[704] PBX LINEPBX LINE4. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: ALL TRUNKS C.O. LINERELATED ITEMS: MMC709 PBX ACCESS CODE