Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 415 REPORT TRUNK ABANDON DATADESCRIPTION:Allows the system administrator of technician to enable or disable the reporting of bandoned CO callsfor which CLIP information has been collected on a per trunk basis.There are two options for this MMC as follows.0 REPORT : NO Abandoned call records for incoming calls with CLIP informationwill not be printed on SMDR or stored in the system callabandon list.These records will continue to be stored in the station review list.1 REPORT : YES Abandoned call records for incoming calls with CLIP information willbe printed on SMDR or stored in the system call abandon list.These records will also to be stored in the station review list.Note :In order for these abandoned call records to print on SMDR, in MMC 725 SMDROptions, Option 11 Print Abandoned Call Records must be set to YES.ACTION DISPLAY1. Press TRSF 415Display shows[701]TRK ABNDNREPORT : YES2. Dial TRUNK numberORPress UP or DOWN to select trunk and use left or rightsoft key to move cursor[705]TRK ABNDNREPORT : YES3. Dial 1 for YES OR Dial 0 for NOORPress UP or DOWN to scroll through options and use leftor right soft key to return to step 2[705]TRK ABNDNREPORT : NO4. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA : All TRUNKS will not report dataRELATED ITEMS: MMC 119 CLIP DISPLAYMMC 312 ALLOW CLIPMMC 608 ASSIGN REVIEW BLOCKMMC 722 STATION KEY PROGRAMMINGMMC 723 SYSTEM KEY PROGRAMMINGMMC 725 SMDR OPTIONSMMC 728 CLIP TRANSLATION TABLE