Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 421 MSN DIGITDESCRIPTION:Provides a method of assigning a incoming MSN call to a specific station.If any entry in MSN DIGIT TABLE matches to incoming call's called party number, then eitherthe specific station is altered if it is programmed to Accept the callORthe call is cleared if it is programmed to Reject the call.If the Incoming called party number does not have matching entry in MSN table, then theoperator is altered.Using this operation, you can give each MSN number to specific station and you can give option ;when destination is busy,incoming call must be cleared or camp-on that station to alarm there isanother call.There are total 8 entries on a trunk basis and each entry consists of the following fields.0. DIGITS Digits to be received. Wild card(Q) is valid entry and 10 digitsmaximum.1. DAY DEST Destination in day mode and it could be a station, a station group.Repeat (B) will be acceptable to the system if received-digit is withinnumbering plan for a station or station group..2. NIGHT DEST Destination in day mode and it could be a station, a station group.Repeat (B) will be of same result at 1. DAY DEST.3. CALL WAIT Toggles YES or NO, if YES then the call will be camped-on at busydestination while NO gives busy indication.4. OPTION Accept: the selected destination party will be alerted.Rejected: the call is cleared.NOTE:For each BRI access, two adjacent ports are assigned, you only have to change the value for any oneof the two ports from a BRI access, then the value for the other port will be changed automatically.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entry