Qlogic SANbox 5600 Series User Manual

Also see for SANbox 5600 Series: Brochure Supplementary guide Supplementary guide Guidelines Supplementary guide

Contents

Qlogic SANbox 5600 Series User Manual Manual pdf 66 page image

3 – Managing FabricsTracking Fabric Firmware and Software Versions3-20 59097-02 BS3.2.5.1Enabling SNMP ConfigurationTo enable SNMP configuration, do the following:1. On the faceplate display, open the Switch menu and select SNMPProperties to open the SNMP Properties dialog.2. In the SNMP Configuration area, place a check mark in the SNMP Enabledcheck box.3. Click the OK button to save the change to the database.3.2.5.2Enabling In-band ManagementTo enable In-band Management, do the following:1. On the faceplate display, open the Switch menu and select SwitchProperties to open the Switch Properties dialog.2. Click the In-band Management Enable button.3. Click the OK button to save the change to the database.3.3Tracking Fabric Firmware and Software VersionsThe Fabric Tracker option enables you to generate a snapshot or baseline ofcurrent system version information, which can be viewed, analyzed and comparedto other snapshot files, and exported to a file. Information includes date and time,SANsurfer Switch Manager version, switch active firmware version, devicehardware, drivers, and firmware version from FDMI.The Snapshot Analyzer option enables you to: Compare two snapshots Detect mismatches of firmware and driver versions Detect devices that have been moved, added to or removed from the fabric.