Qlogic SANbox 5600 Series User Manual

Also see for SANbox 5600 Series: Brochure Supplementary guide Supplementary guide Guidelines Supplementary guide

Contents

Qlogic SANbox 5600 Series User Manual Manual pdf 155 page image

5 – Managing PortsDisplaying Port Information59097-02 B 5-3A5.1.1.2Displaying Port Operational StatesTo display the operational state on each port in the faceplate display, open theView menu and select View Port States. Table 5-2 lists the possible operationalstates and their meanings. The port operational state refers to actual port stateand not the administrative state you may have assigned.5.1.1.3Displaying Port SpeedsTo display the speed of each port in the faceplate display, open the View menuand select View Port Speeds. Table 5-3 lists the possible port speeds.Table 5-2. Port Operational StatesState DescriptionOn Online – port is active and ready to send data.Ia Inactive – port operational state is offline, but administrative state isonline.Iso Isolated – E_Port has lost its connection. Refer to ”Port InformationData Window” on page 5-8 for information about why the E_Port hasisolated.Off Offline – port is active, can receive signal, but cannot accept a devicelogin.Dia Diagnostics – port is in diagnostics mode in preparation for testingDn Down – the port is disabled, power is removed from the lasers, andcan’t be logged in.Table 5-3. Port SpeedsState DescriptionAu Auto-detect1Gb 1-Gbps transmission speed2Gb 2-Gbps transmission speed4Gb 4-Gbps transmission speed10Gb 10-Gbps transmission speed