3 – Managing FabricsSecuring a Fabric59097-02 B 3-15A3.2.4.6Creating a Security Group MemberTo add a member to a security group, do the following:1. On the faceplate display, click the Security button on the toolbar, or openthe Security menu and select Edit Security to open the Edit Security dialog.2. Choose one of the following methods to open the Create a Security GroupMember dialog: In the graphic window, click a security group and click the SecurityMember button in the toolbar. Right-click on a security group and select Create Members from thepopup menu.3. Open the Group Member pull-down menu and select a Node World-WideName. The switch must be a member of any group in which authentication isused. You can also type in a hex value.4. Open the Authentication pull-down menu, and select a type of protocol to beused for the authentication process for that member. ISL authentication options are None (0 bytes), Chap (16 bytes) MS (CT - Common Transport) authentication options are None (0bytes), MD5 (16 bytes), SHA (20 bytes) Port authentication options are None (0 bytes), Chap (16 bytes)5. In the Secret area, enter an authentication "password" to be assigned thatmember. Or, you can click the Generate Secret button to randomlygenerate a secret.6. In the Binding field (ISL groups only), enter the domain ID (1-239) for theswitch for the ISL group member. The WWN of the switch must be at theentered domain ID when attempting to enter the fabric, otherwise it willbecome isolated.7. Click the OK button to save the changes.
