55Reset the settings/Reboot the camera [Default reset]Click the [Default reset] tab of the "Maintenance" page. (☞ Pages 13 and 14: How to display/operate the setupmenu)The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed onthis page.[Reset to the default(Except the network settings)]Click the [Execute] button to reset the settings to thedefault. Note that the network settings will not be reset.It is impossible to operate the camera for around 2 min-utes after the initialization.[Load the default HTML files(setup menu).]Click the [Execute] button to reset the HTML files to thedefault. It is impossible to operate the camera foraround 2 minutes after the initialization.[Reset to the default and load the default HTMLfiles.]Click the [Execute] button to reset the settings of thecamera and the HTML files to the default. Note that thenetwork settings will not be reset. It is impossible tooperate the camera for around 2 minutes after the ini-tialization.[Reboot]Click the [Execute] button to reboot the camera. It isimpossible to operate the camera for around 2 minutesafter rebooting the camera.Note:• To initialize the network settings (☞ page 44), turnoff the power of the camera, then turn on the poweragain while holding down the [INITIAL SET] buttonon the unit for 5 seconds. Wait around 2 minutesafter releasing the button. The camera will start upand the settings including the network settings willbe initialized. Do not turn off the power of the cam-era around 2 minutes just after turning on the power.• The system log (☞ page 53) will be deleted whenthe initialization of the setup data is performed orthe camera is restarted.
