17Configure the basic settings of the camera [Basic]The basic settings such as camera title and time and date can be configured on the "Basic" page.Configure the basic settings [Basic]Click the [Basic] tab on the "Basic" page. (☞ Pages 13 and 14: How to display/operate the setup menu)The settings such as the camera title, time and date, etc. can be configured on this page.[Camera title]Enter the title of the camera. Click the [Set] button afterentering the title of the camera. The entered title will bedisplayed in the camera title field.Available number of characters: 0 - 20 charactersDefault: Varies as follows depending on the model inuse.WV-SP105WV-SP102[Date/time]Enter the current time and date. When "12h" is selectedfor "Time display format", "AM" or "PM" can beselected.Available range: 01/01/2010 00:00:00 - 31/12/203523:59:59Important:• Use an NTP server when the more accurate time &date setting is required for the system operation. ☞Page 43)[Time display format]Select the time display format from "24h", "12h" and"Off". Enter the current hour reflecting this setting whenentering the current time and date for "Date/time". Tohide time and date, select "Off".Default: 24h[Date/time display format]Select a date/time display format. When "2010/04/0113:10:00" is set for "Date/time" after selecting "24h" for"Date/time display format", time & date will be respec-tively displayed as follows.DD/MM/YYYY: 01/04/2010 13:10:00MM/DD/YYYY: 04/01/2010 13:10:00DD/Mmm/YYYY: 01/Apr/2010 13:10:00YYYY/MM/DD: 2010/04/01 13:10:00Mmm/DD/YYYY: Apr/01/2010 13:10:00Default: DD/MM/YYYY (PAL model)Mmm/DD/YYYY (NTSC model)[Summer time(daylight saving)]Select "In" or "Out" to determine whether or not toapply daylight saving time. Configure this setting if thesummer time (daylight saving time) is applied in thelocation where the camera is in use.In: Applies summer time. An asterisk (*) will be dis-played on the left side of the displayed time anddate.Out: Does not apply summer time.Default: Out[Camera title on screen]Select "On" or "Off" to determine whether or not to dis-play the camera title on the screen.When "On" is selected, the character string entered for"Camera title on screen(0 - 9,A - Z)" will be displayed atthe position selected for "OSD position".Default: Off[Camera title on screen(0 - 9,A - Z)]Enter a character string to be displayed on the image.Available number of characters: 0 - 16 charactersAvailable characters: 0-9, A-Z and the followingmarks.!"#$% &'()*+,-./:; =?Default: None (blank)