Panasonic WV-SP105 Operating Instructions Manual

Also see for i-Pro WV-SP102: Integration note Product catalog Comparison chart Specifications Datasheet

Contents

Panasonic WV-SP105 Operating Instructions Manual Manual pdf 19 page image

19Configure the settings relating to images [Image]The settings relating to JPEG and H.264 images such as the settings of image quality, etc. can be configured onthis page.The "Image" page has 2 tabs; the [JPEG/H.264] tab and the [Image/Privacy] tab.Configure the settings relating to the aspect ratio [JPEG/H.264]Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)[Aspect ratio]Select "4:3" or "16:9" for the aspect ratio.Default: 4:3Configure the settings relating to JPEG images [JPEG/H.264]Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)■ JPEGConfigure the settings such as "Refresh interval(JPEG)*", "Image capture size" and "Image quality" onthis section. Refer to page 20 for further informationabout the settings relating to H.264 images.[Refresh interval (JPEG)*]Select an interval to refresh the displayed JPEG imagefrom the following.0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/6fps*/ 10fps*/ 12fps* (PAL model)/ 15fps*/ 30fps*Default: 5fpsNote:• When "On" is selected for "H.264 transmission", therefresh interval may be longer than the set valuewhen any value with an asterisk (*) on the right isselected.[Image capture size (Initial display)]Select the image capture size to display the JPEGimage on the "Live" page for the first time.• When "4:3" is selected for "Aspect ratio"QVGA/ VGA/ 1280 x 960* 1• When "16:9" is selected for "Aspect ratio"320×180/ 640×360/ 1280 ×720* 1Default: 1280x960*1VGA*2*1 SP105*2 SP102Note:• i-PRO Series does not support aspect ratio of"16:9", if not specified (as of October 2010).• Image adjustment functions are activated for theangle of view in the aspect ratio of 4:3 even while"16:9" is being selected for "Aspect ratio". Areamasking under the backlight compensation (BLC)function can be set only when the aspect ratio is"4:3".If the aspect ratio is changed to "16:9" after settingof the backlight compensation function, the settingof area masking is maintained.