Panasonic WV-SP105 Operating Instructions Manual

Also see for i-Pro WV-SP102: Integration note Product catalog Comparison chart Specifications Datasheet

Contents

Panasonic WV-SP105 Operating Instructions Manual Manual pdf 20 page image

2020[Image quality]Specify the image quality of JPEG images.0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 LowDefault: 5 NormalConfigure the settings relating to H.264 images [JPEG/H.264]Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)Configure the settings relating to H.264 image such as "Max bit rate (per client)*", "Image capture size", "Imagequality", etc. in this section.Refer to page 19 for further information about the settings relating to JPEG images.■ H.264 (1) · H.264 (2)[H.264 transmission]Select "On" or "Off" to determine whether or not totransmit H.264 images.On: Transmits H.264 images.Off: Does not transmit H.264 images.Default: OnNote:• When "On" is selected for "H.264 transmission" in"H.264(1)", displaying of H.264 images or JPEGimages on the "Live" page will be available.• When "On" is selected for "H.264 transmission" in"H.264(1)" and "H.264(2)", H.264 images are view-able using other devices with each setting.• When "On" is selected for "H.264 transmission" in"H.264(1)" or "H.264(2)", the transmission interval ofJPEG images may sometimes become longer.[Internet mode (over HTTP)]Select "On" when transmitting H.264 images via theInternet. It is possible to transmit H.264 images withoutchanging the broadband router settings configured forJPEG image transmission.On: H.264 images will be transmitted using the HTTPport. Refer to page 45 for further information aboutthe HTTP port number settings.Off: H.264 images will be transmitted using the UDPport.Default: Off