Panasonic TH-98LQ70U Operating Instructions Manual

Also see for TH-84LQ70U: Operating instructions

Panasonic TH-98LQ70U Operating Instructions Manual Manual pdf 64 page image

English64■ DIGITAL LINK Terminal connectionA twisted pair cable transmitter, such as thePanasonic Digital Interface Box (ET-YFB100G), usestwisted pair cables to transmit inputted video andaudio signals, and these digital signals can be input tothe Display via the DIGITAL LINK terminal.Back of the DisplayCOMPUTERLAN TerminalLAN cable (not supplied)Example: Panasonic ET-YFB100GHub or broadband routerNote● When using a DIGITAL LINK connection, set eachitem in [Network settings]. (see page 52)● The Panasonic Digital Interface Box (ET-YFB100G)does not correspond to 4K signal.Precautions for use while connecting with a twistedpair cable transmitterAbout installation / connection● Ask the dealer or a qualified technician to carry outthe cable wiring work for DIGITAL LINK connections.Insufficient wiring work may cause the inability toapply the cable transmission characteristics andcropped or fuzzy images and sounds.● The transmission distance between the twisted paircable transmitter and the device is up to 100 meters.Exceeding this distance can cause cropped imagesor sounds, as well as LAN communication errors.● Do not use a hub between the twisted pair cabletransmitter and the device.● When connecting the Display using the twisted paircable transmitter (receiver) of other manufacturer,do not use another twisted pair cable transmitterbetween the twisted pair cable transmitter of othermanufacturer and this device. The images andsounds may be interrupted or become unstable.● If possible, lay the cable extended and not coiled inorder to minimize both external and internal noise.● Lay out cables of the twist pair cable transmitter andthis product away from other cables, especially fromthe power supply cable.● When laying multiple cables, keep them together asclose as possible running parallelly and not bundled.● After laying the cable(s), check that the signal qualityin [DIGITAL LINK status] is -12 dB or below.About Twisted pair cables● Between the twisted pair cable transmitter andthe device, use a LAN cable that conforms to thefollowing conditions.• It meets or exceeds CAT5e standards• It is a straight cable• It is a shielded cable (with a connector)• It is a solid cable● When laying the cable(s), use an instrument such asa cable tester or cable analyser and check whetherthe cable characteristics are CAT5e or above. Whenusing a relay connector along the path, also includethis in the measurements.● Do not pull cables hard. Also, avoid bending or foldingthem forcefully.Other● This device is compatible with our Digital InterfaceBox (ET-YFB100G). For the twisted pair cabletransmitter of the other maker, see the web site:http://panasonic.net/prodisplays/support/digitallink.html