Panasonic TH-98LQ70U Operating Instructions Manual

Also see for TH-84LQ70U: Operating instructions

Panasonic TH-98LQ70U Operating Instructions Manual Manual pdf 56 page image

English56Weekly command timerYou can set 7-day timer programming by setting timeand command.● Before setting [Weekly command timer], set [Day/Time settings]. (see page 50)1 Select [Function] with .Select [On] with .Weekly command timerFunctionMONDAYFRIDAYTUESDAYSATURDAYWEDNESDAYSUNDAYTHURSDAYProgramEditOnProgram1Program3Program3Program6Program42 Select day with .Select programme number with .You can set from [Program1] to [Program7]. [---]indicates it is not set.Note● When [Function] is set to [On], [On/Off timersettings] (see page 50) is unavailable and [Interval]/ [Time designation] in [Mode] of [Screensaver] (seepage 45) cannot be selected.3 Select [ProgramEdit] with andpress .The following screen will be displayed.––:––––:––12:009:12––:––10:30––:––8:00------POFAVL:10---IMS:SL1---PON01020304050607081Weekly command timerProgram 1231 Programme number (1 - 7)2 Setting status of the programme number, currentlyselected● [--:--] indicates the time is not set.[---] indicates the command is not set.3 Command number (1 - 64)On this screen, setting status for each programnumber is displayed. You can set up to 64 commandnumbers for 1 programme.4 Select [Program] with , and thenswitch programme number (1 - 7) with.5 Select the command number to setwith .The command numbers to be displayed on the screenare 8 commands. Press to switch page.6 Press .The following screen will be displayed.IMS:SL1112:3402Weekly command timerProgramCommand NoTimeCommand7 Select [Time] or [Command] withand set with .[Time]:Press once to change the time by 1 minute.Keep pressing down to change the time by 15minutes.[Command]:Select a command to execute at the set time. Thisunit has 64 commands to set. (see page 72)To set other command numbersSelect [Command No] with , and then selectcommand number with to set other commandnumbers directly without returning to the previousscreen.Note● Press to return to the previous screen.● Command is performed in order of execution time,regardless of the command number.● When a command execution time overlaps with thatof other commands, these commands are performedin number order.● By pressing , [Time] is displayed as --:--,and [Command] is displayed as ---.