Panasonic TH-98LQ70U Operating Instructions Manual

Also see for TH-84LQ70U: Operating instructions

Panasonic TH-98LQ70U Operating Instructions Manual Manual pdf 57 page image

57EnglishAudio input selectSet up the sound when an image input is selected.Select image input with .Select audio input with .HDMI1HDMI2HDMI3HDMI4DisplayPortDIGITAL LINKDVI-DPCSDI1AUDIO INAUDIO INDIGITAL LINKDisplayPortHDMI4HDMI3HDMI2HDMI1AUDIO INAudio input selectImage input Audio inputHDMI1 HDMI1 / AUDIO IN / NO AUDIOHDMI2 HDMI2 / AUDIO IN / NO AUDIOHDMI3 HDMI3 / AUDIO IN / NO AUDIOHDMI4 HDMI4 / AUDIO IN / NO AUDIODisplayPort AUDIO IN / DisplayPort /NO AUDIODIGITAL LINK AUDIO IN / DIGITAL LINK /NO AUDIODVI-D / PC AUDIO IN / NO AUDIOSDI1* SDI1*/ AUDIO IN / NO AUDIO● [NO AUDIO]: No audio input (Mute)*: When a Terminal Board is installed to the SLOT, itsTerminal name will be displayed and it will be possibleto select sound.When Image input and Audio input differ from eachother, the Audio input is displayed as below.AUDIO INHDMI116:9Input searchWhen a signal is not detected, another input with asignal is automatically selected.Select the item with .Select the set point with .Input searchInput searchPrimary inputSecondary inputOff[Input search][Off]:When there is no signal, the input is not switchedautomatically.[All inputs]:Searches all inputs and switches to an input with asignal.Input search is executed in the following order.(Example) When the current input is [PC][PC] → [SDI1]* → · · · · · · · · · → [DVI-D][Priority]:Searches [Primary input] and [Secondary input] inorder and switches to an input with a signal.Searching...[Searching...] is displayed during the input search.[Primary input], [Secondary input]Set the input to search when [Priority] is selected.(NONE) / [HDMI1] / [HDMI2] / [HDMI3] / [HDMI4] /[DisplayPort] / [DIGITAL LINK] / [DVI-D] / [PC] /[SDI1]**: When a Terminal Board is installed to the SLOT, itsTerminal name will be displayed.Note● This menu is available only when [Input lock] is[Off]. (see page 58)● If the input is changed by this function, the last inputis selected when the power is turned on next time.If you wish to retain the original input when thepower is turned on, set [Initial input] to the originalinput.● Not available during [4 Input multi display].