|
61EnglishPower on screen delayYou can set the power-on delay time of the displays toreduce the power load, when you press On / Off switch> to turn on the multiple displays that areset together.Set each display’s setting individually.[Off]: The display will be turned on at the sametime as ispressed.[AUTO]: Sets the delay time automatically accordingto the number set for [Display ID].[1 to 30]: Set the power-on delay time (second).After pressing switch>, the display will be powered on withtime delay depending on this setting.Note● During this function is working, the power indicator isblinking green.● This function also works when the power recoversfrom failure or after plugging off and in again thepower cord.DVI-D power management modeSets the operational mode of [DVI-D powermanagement].[Standard mode]:Activates power management when synchronizationsignals are not detected.[Low power mode]:Activates power management also when +5V DC in[DVI-D IN] terminal is not detected.HDMI power management modeSets the operational mode of HDMI Power management.[Standard mode]:Activates power management when synchronizationsignals are not detected.[Low power mode]:Activates power management also when +5V DC inHDMI terminal is not detected.Clock displaySets to display / hide the clock.[Off]: Hides the clock.[On]: Displays the clock.Note● The clock is displayed at the lower left of the screenwhen button is pressed.● When [Day/Time settings] is not set, the clock is notdisplayed even when [Clock display] is [On]. (seepage 50)Auto setupSets the operational mode of the automatic positionadjustment in the [Position] menu.[Manual]: Automatic position adjustment starts when is pressed on the remotecontrol or automatic position adjustment isexecuted from the [Position] menu.[Auto]: Other than remote control or menuoperation, automatic position adjustmentstarts:When the display power is turned ON.When the input signal is switched.Power on message(No activity poweroff)Sets to show/hide [No activity power off] precautions atthe time the unit is turned on.[On]: The warning precautions are shown at the timeof power ON.[Off]: The warning precautions are not shown at thetime of power ON.Note● This setting is enabled only when [No activity poweroff] is [Enable] (see page 51).
|
