Panasonic TH-98LQ70U Operating Instructions Manual

Also see for TH-84LQ70U: Operating instructions

Panasonic TH-98LQ70U Operating Instructions Manual Manual pdf 40 page image

English40Loading profilesLoad profiles and apply the picture adjustment values tothe display as follows.1 In the [Picture] menu, select [Memoryload] with and press .Memory saveMemory loadMemory edit2 Select the profile to load with andpress .1. [ ]2. [ ]3. [ ]MEMORY1MEMORY2MEMORY3Memory loadLoading profiles using numeric buttons on theremote control.Each numeric button <1> - <8> is allocated forloading [MEMORY1] - [MEMORY8].[Function button settings] (see page 48)1 Press any of <1> - <8>.2 Select [Ok] with and press.Memory loadLoad from “MEMORY2”Ok CancelWhen profile is being loaded, profile name isdisplayed.16:9Memory name: MEMORY2Note● Loaded profiles are stored in memory accordingto the selected input terminal.Editing profilesDelete or rename profiles as follows.■ Deleting profiles1 In the [Picture] menu, select [Memoryedit] with and press .Memory saveMemory loadMemory edit2 Select [Memory delete] with andpress .Memory editMemory deleteMemory name change3 Select the profile to delete withand press .1. [ ]2. [ ]3. [ ]MEMORY1MEMORY2MEMORY3Memory deleteAll delete● To delete all profiles, select [All delete].4 Select [Ok] with and press.Memory deleteDelete the “MEMORY1” dataOk Cancel■ Renaming profiles1 In the [Picture] menu, select [Memoryedit] with and press .Memory saveMemory loadMemory edit2 Select [Memory name change] withand press .Memory editMemory deleteMemory name change3 Select the profile to rename withand press .1. [ ]2. [ ]3. [ ]MEMORY1MEMORY2MEMORY3Memory name change