Panasonic TH-85VX200W Operating Instructions Manual

Also see for TH-103VX200C: Service manual

Contents

Panasonic TH-85VX200W Operating Instructions Manual Manual pdf 58 page image

54Options AdjustmentsItem Adjustments3D EmitterSet the infrared transmitter for the 3D Eyewear.INT: Use the infrared transmitter of the unit.EXT: Use the external 3D IR TRANSMITTER (available separately.)Function button assign 1Function button assign 2Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed.3D settings: The “3D Settings” menu is displayed.Scrolling bar: The screen saver activates, and after 15 minutes, the display power shuts down(standby).Test patterns: The test pattern is displayed by switching among seven patterns.Blue only: The screen displays only blue color for image adjustment.Signal: The “Signal” menu is displayed.3D Safety Precautions3D Safety Precautions show/hide is set during power ON.On: 3D Safety Precaution is shown every time when the power is ON.Off: 3D Safety Precaution is not shown when the power is ON.When the setting changes from “On” to “Off”, the conrmation screen is displayed as below.Pressing “YES” switches the setting.YES NO3D Safety PrecautionsIf Off is selected, the 3D safety precautionswill not be displayed when power is turned on.Change Setting?Memory lock Locks or unlocks saved proles. Also for setting passwords. (see page 38)Using FUNCTION buttonPressing the FUNCTION button activates one of the following ve functions. The settingsof functions are performed with the “Function button assign 1” and “Function button assign2” on the Options menu. (see above)The factory preset functions are as described below.FUNCTION 1 Button: 3D SettingsFUNCTION 2 Button: Signal3D Settings / SignalThe menu screen is displayed.(Example: 3D Settings)3D3D Picture DisplayNormalAuto3D Picture Format3D Settings3D Picture SequenceSafety PrecautionsPressing the FUNCTION button clears the menu.Scrolling bar / Test patterns / Blue onlyConrmation screen (Example: Scrolling bar)Yes NoFunction 1Scrolling barScrolling barActivates the “Scrolling bar only” screensaver. After15 minutes, the display enters standby mode.To exit this mode, press any button.Blue onlyThe screen displays only blue color for imageadjustment.To exit this mode, press FUNCTION button.Note:“PC Power management” and “Auto power off” are deactivated during “Scrolling bar” or “Test patterns” operation.(see page 43)Press to select“Yes”.Press.Test patternsEach time you press , a different test pattern is displayed(seven in all).Color Bars Red GreenBlueFrame(2 lines × 2 dots)Black 1% windowTo exit this mode, press any button other than .The operation starts.