Panasonic TH-85VX200W Operating Instructions Manual

Also see for TH-103VX200C: Service manual

Contents

Panasonic TH-85VX200W Operating Instructions Manual Manual pdf 20 page image

16Selecting the input signalPress to select the input signal to be played back from the equipmentwhich has been connected to the Plasma Display.HDMI input terminals in HDMI 1 to HDMI 4.Component or RGB input terminal in COMPONENT/RGB IN.*PC input terminal in PC IN.* “COMPONENT” may be displayed as “RGB” depending on thesetting of “Component/RGB-in select”. (see page 41)Input terminal in Terminal BoardWhen a dual input Terminal Board is installed, “SLOT INPUT A” and “SLOT INPUT B”are displayed.When an optional Terminal Board is installed:Using dedicated buttons for input selectionNotes:• Selecting is also possible by pressing the INPUT button on theunit.• Select to match the signals from the source connected to thecomponent/RGB input terminals. (see page 41)• Image retention (image lag) may occur on the plasma displaypanel when a still picture is kept on the panel for an extendedperiod. The function that darkens the screen slightly is activatedto prevent image retention (see page 60), but this function is notthe perfect solution to image retention.INPUTMENUENTER/HDMI1HDMI2HDMI3HDMI4COMPONENTPCINPUTSLOT INPUTHDMI1HDMI2HDMI3HDMI4COMPONENTPCINPUTPress to select HDMI signal terminals in HDMI 1 to HDMI 4.Press to select component or RGB signal terminal in COMPONENT/RGB IN.Press to select PC signal terminal in PC IN.Press to select Input terminal in Terminal Board.For dual input Terminal Board, you can select either input terminalusing A or B button.