22To view the 3D imagesViewing 3D imagesTo view the contents of the Frame Sequential format (ex. 3D-compatible Blu-ray Disc, etc.) with 3D effectConnect the 3D-compatible player via an HDMI cable (see page 11) and playback the contents.• Use fully wired HDMI compliant cable.• For the settings of the player, read the manual of the player.• If you use the non 3D-compatible player, the images will be displayed without 3D effect.To view the contents of 3D formats other than Frame Sequential with 3D effect.Match the picture format in “3D Picture Format” (see page 44) before viewing.• You can view “Side by Side” and “Top and Bottom” with 3D effect even if you use the non 3D-compatible player.• Please consult the suppliers of contents or programmes for availability of this service.Turn the 3D Eyewear on• Press the power button on the 3D Eyewear for about 1 second. (see page 20)Put on the 3D Eyewear• If the 3D Eyewear slips out of place, hold it in place using the specialised band, and adjust the length of theband. (see page 21)Watch the 3D imagesTo turn the 3D Eyewear offAfter using the 3D Eyewear, press the power button on the 3D Eyewear for about 1 second to turn it off. (seepage 20)Notes:• If the room is lit by uorescent lights (50 Hz) and light appears to icker when using the 3D Eyewear, switch off theuorescent light.• 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.• Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such ascomputer screens, digital clocks or calculators, etc.) may be difcult to see while wearing the 3D Eyewear.• Do not use the 3D Eyewear as sunglasses.• 3D effects may be perceived differently depending on the person.