361 In the Picture menu, select “Memory load”.Memory saveMemory loadMemory edit2 access1 select2 Select the prole to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 set1 selectProles are labeled with these icons to indicate theirlocked status. (see below) on the remote control>1 Press to list the proles.2 Select the prole to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 set1 selectProles are labeled with these icons to indicate theirlocked status. (see below)To load proles 1–91 Press a button in the range – .2 Select “Ok”.Ok CancelMemory loadLoad from ”MEMORY2” 11 select2 setTo load proles 10–16Example: To load prole 161 Press .The prole number is displayed in the upper-rightcorner of the screen.162 Select “Ok”.Ok CancelMemory loadLoad from ”MEMORY16”1 select2 setLoading prolesLoad proles and apply the picture adjustment values to the display as follows.Notes:• Loaded proles are stored in memory according to the selected input terminal (see page 16).• When the settings are locked in “Extended life settings”, proles cannot be loaded.Picture ProlesLoading locked proles…In the Picture menu, proles are labeled with theseicons to indicate their locked status.Picture Mode Dynamic250ContrastNormaliseBrightness:Lock1:Lock2Operations with locked proles are restricted. (see page 38)Picture adjustment values in the Picture menu cannot be changed, except for the “Picture Mode”. Once you edit the“Picture Mode” setting, you can edit “Contrast”, “Brightness”, and other picture adjustment values.Lock1Picture adjustment values are shown.250560Advanced settingsPicture ModeContrastNormaliseBrightnessColourHueSharpnessWhite balanceNormalNormalCan be specied.Cannot be specied.Lock2Picture adjustment values are hidden.Advanced settingsPicture ModeContrastNormaliseBrightnessColourHueSharpnessWhite balanceNormal Can be specied.Cannot be specied.PCMemory name: MEMORY2NANODRIFT16:9When prole is beingloaded, prole name isdisplayed.
