30Enables ne picture adjustment at a professional level.Notes:The adjustment values are memorized separately for each input terminal.•The adjustment range values should be used as an adjustment reference.•Select the item and set.Advanced settingsCarry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R” , “W/B High G” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R” , “W/B Low G” and “W/B Low B”settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment. BlackextensionAdjusts the dark shades of the image in gradation.Less More Input level Adjustment of parts which are extremely bright and hard to see.Less More Gamma S Curve 1.0* 2.0 2.2 2.6* When 2k1k signals are received with the Dual Link HD-SDITerminal Board (TY-FB11DHD), Gamma “1.0” cannot beselected.Down Up “W/B” adjustmentLess More00W/B High RW/B High G0W/B High B0W/B Low R0W/B Low G0W/B Low BAdjusts the white balance for light red, lightgreen or light blue areas.Adjusts the white balance for dark red, darkgreen or dark blue areas.NormalAdvanced settingsPicture Mode2505NormalContrastNormaliseBrightness6Colour0HueSharpnessWhite balance02.2Input levelAdvanced settingsNormaliseGamma00OffW/B High RW/B High G0W/B High B0W/B Low R0W/B Low G0W/B Low BCinema realityOffStudio Gain0Black extensionOffNoise reductionColour Gamut2 access1 select2 change1 selectPicture Adjustments