Panasonic TH-85VX200W Operating Instructions Manual

Also see for TH-103VX200C: Service manual

Contents

Panasonic TH-85VX200W Operating Instructions Manual Manual pdf 11 page image

7Accessories SupplyAccessoriesPower supply cordCheck that you have the accessories and items shownPrecaution on battery useIncorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.Disposal of batteries should be in an environment-friendly manner.Observe the following precaution:1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.6. Do not burn or breakup batteries.Batteries must not be exposed to excessive heat such as sunshine, re or the like.Remote ControlTransmitterN2QAYB000562Batteries forthe RemoteControlTransmitter(R6 (UM3) Size × 2)Fixing band × 2TMME203These accessories will be used by professional installers whenthey install the unit.TH-85VX200WTH-103VX200WEyebolt cap × 1Eyebolt cap × 1 Allen wrenchEyebolt × 1(M12)Allen wrenchClamper × 1TMM15412-2TH-85VX200WFerrite core × 2J0KG00000014Noise cut lterTXZDM011MBEUse the clamperwhen connecting aLAN cable.(see page 55)Use the Ferrite cores and Noise cut lter to complywith the EMC standard. (see page 55)Remote Control BatteriesRequires two R6 batteries.1. Pull and hold the hook, then openthe battery cover.2. Insert batteries - note correctpolarity ( + and -). Helpful Hint:For frequent remote controlusers, replace old batterieswith Alkaline batteries forlonger life.OpenCloseHook“R6 (UM3)” size3D Eyewear set(see page 20)ScrewdriverOperating InstructionsFor 3D Eyewear(see page 21)Eyebolt × 1(M16)