Panasonic TH-85VX200W Operating Instructions Manual

Also see for TH-103VX200C: Service manual

Contents

Panasonic TH-85VX200W Operating Instructions Manual Manual pdf 50 page image

46Setup menu• SyncThis function operates only during input from PC IN terminal.Setting RGB sync signalConrm that the input is set to RGB input (this setting is valid only for RGB input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.Setting Component sync signalConrm that the input is set to Component input (this setting is valid only for Component input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.Note:Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”.• SDI ThroughSet the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).Off OnOn: Enables active through.Off: Disables active through.Note:Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board(TY-FB11DHD) is selected.• FRAME CREATIONDisplays reducing screen icker image for 50Hz/25Hz signal input.Off OnNote:This function activates only for 50Hz/25Hz signal input with 2D images.• 24p SMOOTH FILMDuring 2D or 3D viewing, images captured at 24 frames per second are provided in a smooth manner.Off OnNote:This function can be set only for 24p signal input with 2D or 3D images.• 3D 24p FILM DISPLAYFor 3D images, images captured at 24 frames per second are set.60Hz 48Hz60Hz: Increases the number of frames to reproduce more natural movement images.48Hz: Reproduces images like lm-specic.Note:This function can be set only for 24p signal input with 3D images.• HDMI RangeSwitches the dynamic range according to the input signal from HDMI 1 to HDMI 4 terminals.Video(16-235) Full(0-255) AutoVideo(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD playerFull(0-255): If the input signal is full range, Example: HDMI terminal output for personal computerAuto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.Note:This function can be set only for HDMI 1 to HDMI 4 terminal input.