Panasonic TH-80LFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-80LFB70U Operating Instructions Manual Manual pdf 77 page image

Weekly Command TimerFunctionMonday Program1Program3OnTuesdaySundayProgram EditThursdayFriday ---SaturdayProgram4Program6---Program3WednesdaySundayProgram EditThursdayFriday ---SaturdayProgram4Program6Program3Weekly Command Timer 1/8Program01 8:00 PON10:30 IMS:SL1––:–– ---––:–– ---––:–– ---12:00 POF9:12 AVL:10––:–– ---102070804050603Options 1/3Onscreen displayWeekly Command TimerAudio input selectInput SearchOnProgram number75Options AdjustmentsWeekly Command TimerYou can set 7-day timer programming by setting time and command.Note:Before setting Weekly Command Timer, set Day/Time Settings. (see page 58)Press to select Function.Press to select “On”.Note:• When Function is set to On, On/Off TimerSettings (see page 58) is unavailableand Interval / Time Designation in Modeof Screensaver (see page 61) cannot beselected.1Press to select a day.Press to select a program number.Note:• You can set the program from 1 to 7.--- indicates unset.2Press to select Program Edit.Press to show the Program Edit screen.Press to select Program.Press to change the program numbers (1-7).43Press ACTION ( ) buttonProgram Edit screenNormalisationWhen both main unit buttons and remote control are disabled due to the “Button lock” or “Remocon User level”adjustments, set all the values “Off” so that all the buttons are enabled again.Press the - / button on main unit together with button on the remote control and hold for more than 5 seconds.The “Shipping” menu is displayed and the lock is released when it disappears.Item AdjustmentsPower On Message(No activity poweroff)Whether to show/hide No activity power off Precautions at the time of power ON is set.On: The warning precautions are shown at the time of power ON.Off: The warning precautions are not shown at the time of power ON.Note: This setting is enabled only if “No activity power off” is “Enable” (see page 67).Power On Message(Power Management)Whether to show/hide an information message that tells the power has been turned off by PowerManagement when the power is set to ON.On: The information is shown at the time of power ON.Off: The information is not shown at the time of power ON.Note: This setting is enabled only if “Power management” function is “On” (see page 63).