Panasonic TH-80LFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-80LFB70U Operating Instructions Manual Manual pdf 53 page image

Advanced settingsNormalise NormalInput levelGamma 2.2W/B High R 50W/B High G 50W/B High B 50W/B Low R 50W/B Low G 50W/B Low B 500PictureNormalise NormalPicture ModeNormalNormalBacklight 100Contrast 100Brightness 50Colour 50Hue 50SharpnessWhite balanceAdvanced settingsMaxFRAME CREATION5FRAME CREATIONImproves motion picture quality by reducing motion blur.Press the left or right button to switch betweenmodes.Off Min Mid MaxNotes:• The mode is memorized per input terminal.• Even if “Normalise” is selected, the Normal settingwill not be restored.• The picture and menu will disappear for a momentif you switch the mode to Off, or switch from Off toanother mode.5112Press to display the Picture menu.Press to select the menu to adjust.Select the desired level by looking at the picture behind the menu.Select to adjust each item.Press “ ” or “ ” button to switch between modes.• In “ENGLISH (US)” OSD language, the “Whitebalance” is displayed as “COLOR TEMP”.While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or theACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation) (except “FRAME CREATION”)Note:Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal,input and menu setting.Picture AdjustmentsPress “ ” or “ ” button to switch between modes.Normal* DynamicCinemaNormalFor viewing in standard (evening lighting) environments.This menu selects the normal levels of Brightnessand Contrast.* In “ENGLISH (US)” OSD language, this isdisplayed as “STANDARD”.DynamicFor viewing in brighter environments.This menu selects higher than normal levels ofBrightness and Contrast.CinemaFor use in viewing tone-focused pictures withbrightness reduced.Notes:• If you would like to change the picture and colour ofthe selected Picture menu to something else, adjustusing the items in the Picture menu. (see next page)• In “ENGLISH (US)” OSD language, the “PictureMode” is displayed as “PICTURE MENU”.Advanced settingsEnables ne picture adjustment at a professionallevel (see next see page).Press to enterAdvanced settings.Normal (9300K) Cool (11500K) Warm (6500K)