Panasonic TH-80LFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-80LFB70U Operating Instructions Manual Manual pdf 23 page image

21INPUTMENUVOLENTER/+ /- /Basic ControlsMENU Screen ON / OFFEach time the MENU button is pressed, the menu screen will switch. (seepage 46)Normal Viewing PictureSound Pos. /Size SetupVolume AdjustmentVolume Up “+” Down “–”When the menu screen is displayed:“+” : press to move the cursor up“–” : press to move the cursor down(see page 46)Remote controlsensorMain Power On / Off SwitchBrightness SensorDetects the brightness in the viewing environment. (see page 63)Main Unit Power IndicatorThe Power Indicator will light.• Power-OFF .... Indicator not illuminated (The unit will stillconsume some power as long as the powercord is still inserted into the wall outlet.)• Standby ........ RedOrange (When “Slot power” is set to “On” andTerminal Board is installed. See page 74)Orange (Depending on the type of the function boardinstalled, when the power is supplied to the slot)Orange (When “Control I/F Select” is set to “DIGITALLINK/LAN” or “Wireless Network Standby” is set to “On”.Refer to “Operating Instructions, Network Operations”)Orange (When “Quick Launch” is set to “On”. See page 59)• Power-ON ...... Green• HDMI1 Power managementHDMI2 Power management......................... Orange (With HDMI1 or HDMI2 input signal. See page 63)* These functions are not supported by TH-80LFB70E.• PC Power management (DPMS)......................... Orange (With PC input signal. See page 63)• DVI-D Power management......................... Orange (With DVI input signal. See page 63)Note:If the power indicator is orange, power consumption during standbyis generally larger than that of when the power indicator is red.Enter / Aspect button(see page 23, 46)INPUT button (INPUT signal selection)(see page 20)SLOT: Terminal board (optional accessories) insertslot (see page 4 )Note:The upper side slot is for terminal board with 2-slotwidth. The terminal board with 1-slot width does notfunction when installed in the upper side slot.Touch panel IR transmission partInstalled on the four sides of the display panel.USB (VIEWER): Connect to USB memory. (see page 31)USB (TOUCH): When using the “WhiteBoardSoftware” from the supplied CD-ROM,connect the computer via USB cable.(see page 44)