Panasonic TH-80LFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-80LFB70U Operating Instructions Manual Manual pdf 50 page image

Pos./SizeAuto SetupNormalise NormalOff0000Dot Clock 0Clock Phase 0Clamp Position1:1 Pixel Mode0H-PosH-SizeV-PosV-Size48Adjusting Pos./Size1 Press to display the Pos./Size menu.Press to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.32Notes:• Pos./Size cannot be adjusted with two screen display.• Adjustment details are memorized separately for different input signal formats (Adjustments for component signals arememorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24psF,1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This pictureposition movement cannot be controlled by the Picture Pos./Size function.Note:Unadjustable items are grayedout.Adjustable items differ dependingon the input signal and thedisplay mode.4Auto Setup When inputting a PC signal as an example, “H-Pos/V-Pos”, “H-Size/V-Size”, “Dot Clock” and “ClockPhase” are automatically corrected.This setting is enabled under the following conditions:• When inputting an analog signal (Component/PC):This setting is enabled if “Component/RGB-in select” (see page 68) in Setup menu is “RGB”.• When inputting a digital signal (HDMI/DVI):A PC format signal enables this setting.When the signal is not PC format, this setting is enabled only if “Over Scan” (see page 49) is “Off” or“1:1 Pixel Mode” (see page 50) is “On”. “H-Size/V-Size” is not automatically adjusted.This setting will be invalid and will not work under the following conditions:• When one of the following inputs is selectedMiracast(TM), MEMORY VIEWER, WHITEBOARD, Panasonic APPLICATION• When VIDEO signal input• During two screen or Digital Zoom.• Aspect is set to “Just”• “Display size” in the Options menu (see page 73) is set to “On”Using Remote ControlWhen on the remote control is pressed, “Auto Setup” will be executed.When Auto Setup does not work, “Invalid” is displayed.Auto modeWhen the “Auto Setup“ is set to “Auto” in the Options menu (see page 74), automatic position adjustment starts:• When the display power is turned ON.• When the input signal is switched.