Panasonic TH-80LFB70U Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-80LFB70U Operating Instructions Manual Manual pdf 46 page image

44Using WhiteBoard SoftwareThe “WhiteBoard software” included in the supplied CD-ROM allows you to perform various functions in addition topen drawing, such as controlling computer's desktop with touch gestures.Preparation1 Connect the computer to the USB (TOUCH) terminal on the side of the display with thesupplied USB cable.2 Connect the computer to the video input terminal on the display.Connect to one of the following input terminals.PC IN (See page 16)HDMI 1, HDMI 2, DVI-D IN (See page 15)Setting the displayMake the following display settings.Switch the input signal to the video input of the computer.•Set “Pos./Size” so that the computer's screen can be displayed correctly on the display. (see page 48)•Starting the WhiteBoard softwareIt is not necessary to install the WhiteBoard software. You can start it directly from the executable le.1 Insert the supplied CD-ROM into the CD-ROM drive.The computer’s desktop screen will be displayed allowing you to perform touch operation.2 Double-tap the “WhiteBoard.exe” le in the “WhiteBoardSoft” folder in the CD-ROM.Notes:See the instruction manual of the WhiteBoard software for more details about how to use the WhiteBoard•software.Before starting the WhiteBoard software, set the computer's screen resolution to within the range supported by the•WhiteBoard software.Exiting the WhiteBoard softwareTap [Exit application] in the main menu.Touch operation when USB connected with computerWith the following inputs, the display’s touch function is enabled.•Miracast(TM), MEMORY VIEWER, WHITEBOARDIf connected to the computer via USB, it is not possible to display the control menu by swiping from the screen•edge.You can display the control menu by pressing INPUT or MENU on the main unit and switch the input or controlthe display setting menu with touch operation. The WhiteBoard software functions are disabled during the touchoperation.They will recover when the menu screen disappears after the touch operation.Control menu see page 28ComputerUSB cable (supplied)USB(TOUCH)USB(TOUCH)USB(VIEWER)