Panasonic TH-65VX300ER Operating Instructions Manual

Also see for TH-65VX300ER: Service manual

Contents

Panasonic TH-65VX300ER Operating Instructions Manual Manual pdf 51 page image

51Setup menuSignalWaveform MonitorMarker settingsRGB/MONO settingsExtended life settingsScreensaverNetwork SetupInput labelFunction Button SettingsOn/Off Timer SetupDay/Time Setup3D SettingsThe RGB/MONO settings function is also enabled/disabled with the FUNCTION button on the remote control (seepage 63).RGBMode SelectOnR On/OffOnG On/OffOnB On/OffRGB/MONO settingsRGBMode SelectOnR On/OffOnG On/OffOnB On/OffRGB/MONO settingsRGBMode SelectOnR On/OffOnG On/OffOnB On/OffRGB/MONO settings2 access1 select2 change1 select2 change1 selectRGB: Displays with one of red, green and blue signals cut.Blue only: Displays in solid blue.MONO: Only Y signal is used for black and white displays.PC16:9NANODRIFTR OffNote:With MONO set, the colour adjustment in the Picture menu is not available.When the setting of each item is enabled, the item being currently set to ‘Enable’ becomes disabled.RGB/MONO settingsTurn off R, G, B signals to adjust the image.When the function is enabled, selected mode is displayed.1 Select mode by “Mode Select”.2 Con¿gure each mode setting.• R On/Off, G On/Off, B On/OffOff OnOn: The red (for “R On/Off”), green (for “G On/Off”) or blue (for “B On/Off”) signal is on.Off: The red (for “R On/Off”), green (for “G On/Off”) or blue (for “B On/Off”) signal is cut.For Blue only modeBlue onlyMode SelectOnBlue onlyRGB/MONO settings• Blue onlyOff OnOn: The Blue only mode is enabled.Off: The Blue only mode is disabledFor MONO modeMONOMode SelectOnMONORGB/MONO settings• MONOOff OnOn: The MONO mode is enabled.Off: The MONO mode is disabledFor RGB mode