Panasonic TH-65VX300ER Operating Instructions Manual

Also see for TH-65VX300ER: Service manual

Contents

Panasonic TH-65VX300ER Operating Instructions Manual Manual pdf 49 page image

49Setup menuMarker settingsVarious markers for editing image are displayed.Notes:• This function is available when “Studio mode” in Options menu is set to “On”• This function is disabled during 3D images.• An aspect of “4:3” or “16:9” is valid for this function. Only an aspect of “16:9” is valid at the input of HD signal.Preset1Marker90%16:9OffTime out (5 min)Marker Size (%)ColourMarker settingsBrightness 380%4:3Marker Size (%)ColourBrightnessCentreColourBrightnessCross HatchColourBrightnessOffOffRedGreenBlue332 access1 selectSelect the item and set.2 change1 selectExternal scaler modePower save OffOffSignalWaveform MonitorMarker settingsRGB/MONO settingsExtended life settingsScreensaverNetwork SetupInput labelFunction Button SettingsOn/Off Timer SetupDay/Time SetupComponent/RGB-in selectRGB3D SettingsMarker display settings• MarkerSet show/hide of the marker.Off: The marker is not displayed.Preset1 / Preset2: The marker is displayed by Preset1 or 2 setting. You can con¿gure the display setting ofPreset1/2.• You can also display the marker with the FUNCTION button on the remote control (see page 63).• Time out (5 min)Set the marker display time-out.On: The marker display disappears in 5 minutes (time out).Off: The marker display time-out does not occur.Marker advanced settings• 16 : 9Select 16:9 marker display and the marker type.Off 4:3(1.33) 13:9(1.44) 14:9(1.55) CNSCO(2.39) VISTA(1.85) 95% 93%90% 88% 80% User• This setting is valid only if an aspect of “16:9” is used.Aspect marker:4:3, 13:9, 14:9, CNSCO, VISTA4:3 marker CNSCO marker (2.39:1) VISTA marker (1.85:1)Safe area marker:95%, 93%, 90%, 88%, 80%, User• Selecting User allows the marker area set in 1% incrementsin “Marker Size (%)” to be reÀected in the con¿guration ofsafe area marker.90% Area marker