36¿les from the Picture menu>1 In the Picture menu, select “Memory load”.Memory saveMemory loadMemory edit2 access1 select2 Select the pro¿le to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 set1 selectPro¿les are labeled with these icons to indicate theirlocked status. (see below)¿les from on the remote control>1 Press to list the pro¿les.2 Select the pro¿le to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 set1 selectPro¿les are labeled with these icons to indicate theirlocked status. (see below)¿les directly from the remote control>To load pro¿les 1–91 Press a button in the range – .2 Select “Ok”.Ok CancelMemory loadLoad from ”MEMORY2” 11 select2 setTo load pro¿les 10–16Example: To load pro¿le 161 Press .The pro¿le number is displayed in the upper-rightcorner of the screen.162 Select “Ok”.Ok CancelMemory loadLoad from ”MEMORY16”1 select2 setLoading pro¿lesLoad pro¿les and apply the picture adjustment values to the display as follows.Notes:• Loaded pro¿les are stored in memory according to the selected input terminal (see page 18).• When the settings are locked in “Extended life settings”, pro¿les cannot be loaded.Picture Pro¿lesLoading locked pro¿les…In the Picture menu, pro¿les are labeled with theseicons to indicate their locked status.Picture Mode Dynamic250ContrastNormaliseBrightness:Lock1:Lock2Operations with locked pro¿les are restricted. (see page 38)Picture adjustment values in the Picture menu cannot be changed, except for the “Picture Mode”. Once you edit the“Picture Mode” setting, you can edit “Contrast”, “Brightness”, and other picture adjustment values.Lock1Picture adjustment values are shown.250560Advanced settingsPicture ModeContrastNormaliseBrightnessColourHueSharpnessWhite balanceNormalNormalCan be speci¿ed.Cannot be speci¿ed.Lock2Picture adjustment values are hidden.Advanced settingsPicture ModeContrastNormaliseBrightnessColourHueSharpnessWhite balanceNormal Can be speci¿ed.Cannot be speci¿ed.PCMemory name: MEMORY2NANODRIFT16:9When pro¿le is beingloaded, pro¿le name isdisplayed.
