Panasonic TH-65VX300ER Operating Instructions Manual

Also see for TH-65VX300ER: Service manual

Contents

Panasonic TH-65VX300ER Operating Instructions Manual Manual pdf 40 page image

40Sound Adjustment1 Display the menu screen.2 Select “Sound”.SetupPos. /SizeSoundPicture 2 access1 select3 Select the item and set.2 adjust1 selectNormalise1VolumeSound Mode NormalBass 0Mid 0Treble 0Balance 0Surround Off4 Exit the menu.Item DetailsSound ModeNormal: Emits the original sound.Dynamic: Accentuates sharp sound.Clear: Attenuates human voice.Bass Adjusts low pitch sounds.Mid Adjusts normal sounds.Treble Adjusts high pitch sounds.Balance Adjusts left and right volumes.Surround Select On or Off.Volume Adjusts the sound volume level.Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.Item DetailsLeft Channel Channel 1 to Channel 16Selects left audio channel.Right Channel Channel 1 to Channel 16Selects right audio channel.Sound Out On OffOn: Enables audio output.Off: Disables audio output.Level MeterOff 1-8ch 9-16chSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter;4 channels each on both right and left sides of thedisplay.Off: Hides the audio level meter.1-8ch: Displays the audio level meter (1-8ch)9-16ch : Displays the audio level meter (9-16ch)SDI Sound OutputThis menu is available only when selecting a slot that any of the following terminal boards is installed:HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDITerminal Board for 3D (TY-FB30DHD3D)Helpful Hint ( Normalise Normalisation)While the “Sound” menu is displayed, if the OK button is pressed during “Normalise”, then all adjustment valuesare returned to the factory settings.2 /2Left ChannelSDI Sound OutputRight ChannelSound OutLevel MeterChannel 1Channel 2OnOff