Panasonic TC-42PD1FA Operating Instructions Manual

Also see for TC-42PD1FA: Service manual

Panasonic TC-42PD1FA Operating Instructions Manual Manual pdf 20 page image

20PICTURE POS./SIZE Controls1 PICTURE POS./SIZE buttonWhen the PICTURE POS./SIZE button ispressed, the Picture Pos./Size menu appears,and the picture size and vertical pictureposition can then be adjusted.The adjustable items and adjustment rangesvary for each input signal and aspect mode.During “AV(S-Video)” and “Component” input signal modesThe Position Left “I” andRight “H” buttons can be usedto change the picture size.The Position Up “F” andDown “G” buttons can beused to adjust the verticalpicture position.Note:(1) The picture size cannot be changed in “Zoom1” mode whena 525p (480p) component signal is being input.(2) The vertical position cannot be changed when Size 1 andSize 2 have been selected in “4:3” mode and when Size 1has been selected in “16:9” mode. In addition, the verticalposition cannot be changed when 1080i signals are beinginput.(3) Adjustment details are memorised separately for differentinput signal formats (NTSC/PAL/SECAM, 525p (480p),1080i, 525i and 625i).(4) If a “Cue” or “Rew” signal from a VCR or DVD player isreceived, the picture position will shift up or down. Thispicture position movement cannot be controlled by thePicture Pos./Size function.Button PictureChanging thesizeExampleMoving thepicture position(up)Moving thepicture position(down)PLASMA DISPLAYINPUTPCMANUAL- ASPECT - AUTOPICTURE MODEMENU NSTRPICTUREPOS./SIZE1PICTUREPOS./SIZESize 1Picture Pos./SizeNormalSizeExitPICTUREPOS./SIZEPosition