Panasonic TC-42PD1FA Operating Instructions Manual

Also see for TC-42PD1FA: Service manual

Panasonic TC-42PD1FA Operating Instructions Manual Manual pdf 28 page image

28Signal MenuDuring “RGB” and “PC” input signal modesSelectNote:(1) The “Sync on G” setting is applied to both the COMPONENT/RGB and PC input terminals.Mode FunctionSync on G Set to “On” when the input signals from the sources connected to the COMPONENT/RGB (R,G, B, HD and VD) input terminals and the PC input terminal are “Sync on G” signals.H-Freq.(kHz) Shows the horizontal scanning frequency for the video signals which are currently beingdisplayed (display only).V-Freq.(Hz) Shows the vertical scanning frequency for the video signals which are currently beingdisplayed (display only).V-Freq. (Hz)Sync on GOn3160H-Freq.(kHz)OffSignal ChangeExitMENUSet up Menu1.Push the “Menu” Button.2.Select the “Set up” Menu by pushing thePosition Up “F” or Down “G” Button andAccess the “Set up” Menu by pushing the“STR” Button.3.Select the required mode by pushing thePosition Up “F” or Down “G” buttons, andset appropriate function by pushing thePosition Left “I” or Right “H” buttons.Mode FunctionCOMPONENT/RGB INSelect to match the signals from the source connected to the COMPONENT/RGB inputterminals.Y, P B, PR signals P “Y/PB/PR”R, G, B, HD, VD signals P “RGB”Panasonic Auto(4:3)Set to “4:3” if using the ASPECT-AUTO button function to view 4:3 images in an unchangedformat. If you would like to view 4:3 images in “Just” format, set to “Just”.OSD Language Select the on-screen display language (English/Deutsch/Français/Italiano/Español).PictureSoundSignalSet upAccessSelectSet upCOMPONENT/RGB INOSD Language4:3Panasonic Auto (4:3)JustRGBEnglishChangeSelectExitMENUY/PB/PR1,2 3MENUSTR