Panasonic TC-42PD1FA Operating Instructions Manual

Also see for TC-42PD1FA: Service manual

Panasonic TC-42PD1FA Operating Instructions Manual Manual pdf 21 page image

21During “RGB” and “PC” input signal modesChoose the option and adjust by pushing the PositionUp “F” or Down “G” buttons, and by setting with thePosition Left “I” or Right “H” buttons.Note:(1) The same adjustment details are memorised in both RGB and PC input signal modes for each type of input signal(frequency).Helpful Hint ( Normalisation)If the N button on the remote control unit is pressed when the Picture Pos./Size display is active, all adjustmentvalues will be returned to the factory setting level.Mode PictureH-posWhen the Position Left “I” button is pressed When the Position Right “H” button is pressedV-posWhen the Position Left “I” button is pressed When the Position Right “H” button is pressedH-sizeWhen the Position Left “I” button is pressed When the Position Right “H” button is pressedV-sizeWhen the Position Left “I” button is pressed When the Position Right “H” button is pressedClockPhaseFlickering and distortion can be eliminated by using the Position Left “I” or Right “H” button to carryout adjustment.Clock PhaseV-sizeH-sizeV-posH-posExitPICTUREPOS./SIZEPicture Pos./SizeNormal AdjustSelectNPICTURE POS./SIZE Controls