Panasonic TC-42PD1FA Operating Instructions Manual

Also see for TC-42PD1FA: Service manual

Panasonic TC-42PD1FA Operating Instructions Manual Manual pdf 27 page image

27Signal Menu1.Push the “Menu” Button.2.Select the “Signal” Menu by pushing thePosition Up “F”or Down “G” Button andAccess the “Signal” Menu by pushing the“STR” Button.3.Select the required mode by pushing thePosition Up “F” or Down “G” buttons, andset the appropriate function by the PositionLeft “I” or Right “H” buttons.Note:(1) The “Signal” screen changes depending on the input signal mode (AV(S-Video), Component, RGB or PC).During “AV(S-Video)” input signal modeSelect the modeSelect the functionDuring “Component” input signal modeSelectMode FunctionColour system Set the colour system to match the input signal. If set to “Auto”, the colour system isdetermined automatically.Scan mode If watching a normal image, select the “Field”.If the recording mode used for a device such as a digital video camera is“Frame”, select the “Frame” to obtain a higher-quality playback image.Mode FunctionColour matrix If the output signals from the source connected to the COMPONENT/RGB input terminals arein 525p (480p) format, the colours in the images from this source will be set to their naturalcolours.MENUSTRPictureSoundSignalSet upAccessSelectSignalColour systemAutoFieldScan modeChangeSelectExitMENU1,2 3SignalColour systemAutoFieldScan modeChangeSelectExitMENUNTSCPALSECAMAuto Note:(1)The display colour for the input signal mode (“AV”) changesaccording to the colour systemsetting.Auto - Green NTSC - MagentaPAL - Yellow SECAM - Cyan(2) PAL-60 signal is displayed only“Auto” mode.AVFieldFrameSignalColour matrix21ChangeExitMENUDuring “AV(S-Video)” inputsignal mode