Panasonic TC-42PD1FA Operating Instructions Manual

Also see for TC-42PD1FA: Service manual

Panasonic TC-42PD1FA Operating Instructions Manual Manual pdf 4 page image

4Safety PrecautionsWARNINGSet-upThis Wide Plasma Display is for use only with the following optional accessories. Use with any other type ofoptional accessories may cause instability which could result in the possibility of injury.BManufactured by Panasonic Pedestal TY-ST42PT1EBManufactured by Panasonic Wall stand TY-ST42PW1EBManufactured by Panasonic Mobile stand TY-ST42PF1EBManufactured by Panasonic Wall-hanging bracket (vertical) TY-WK42PV1EBManufactured by Panasonic Wall-hanging bracket (angled) TY-WK42PR1EBManufactured by Panasonic Ceiling unit TY-CE42PS1EAlways be sure to ask a qualified technician to carry out set-up.Do not place the Wide Plasma Display on sloped or unstable surfaces.BThe Wide Plasma Display may fall off or tip over.Do not place any objects on top of the Wide Plasma Display.BIf water spills onto the Wide Plasma Display or foreign objects get inside it, a short-circuit may occur which couldresult in fire or electric shock. If any foreign objects get inside the Wide Plasma Display, please consult your localPanasonic dealer.If using the pedestal (optional accessory), leave a space of 10 cm or more at the top, left and right, 6 cm ormore at the bottom, and 7 cm or more at the rear. If using some other set-up method, leave a space of 10 cmor more at the top, bottom, left and right, and 1.9 cm or more at the rear.When using the Wide Plasma DisplayThe Wide Plasma Display is designed to operate on 220-240 V AC, 50/60 Hz.Do not cover the ventilation holes.BDoing so may cause the Wide Plasma Display to overheat, which can cause fire or damage to the Wide PlasmaDisplay.Do not stick any foreign objects into the Wide Plasma Display.BDo not insert any metal or flammable objects into the ventilation holes or drop them onto the Wide Plasma Display,as doing so can cause fire or electric shock.Do not remove the cover or modify it in any way.BHigh voltages which can cause severe electric shocks are present inside the Wide Plasma Display. For anyinspection, adjustment and repair work, please contact your local Panasonic dealer.Securely insert the power cord plug as far as it will go.BIf the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wallsocket plate is loose, they should not be used.Do not handle the power cord plug with wet hands.BDoing so may cause electric shocks.Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug,not the cable.BDo not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any hotobjects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable isdamaged, have it repaired at your local Panasonic dealer.If not using the Wide Plasma Display for a prolonged period of time, pull the power cord plug out from the walloutlet.