1.28 Extension Controlling Features326 Feature Guide1.28.3 Walking ExtensionDescriptionIt is possible to use any extension and have your extension settings available to you. Settings such asextension number, one-touch dialling memory, and COS are all available to you at the new location.[Example] This feature is useful when:• Moving location• There is no specific desk for your use.This feature is also known as Walking Station.Conditions[General]• This feature allows extension settings to be switched between PTs (including IP-PTs) and SLTs. Movingbetween tenants is also possible.• Incoming calls to your extension will also reach you at your new location.• An extension personal identification number (PIN) is required to use this feature. (→ 1.28.1 ExtensionPersonal Identification Number (PIN))• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT afterWalking Extension has been activated, the new extension number of the PT must be assigned as thepaired extension through system programming.• If PC programming is being performed for extensions whose extension settings are being transferredby the Walking Extension feature, the Walking Extension feature may not work properly (→ 2.3.1 PCProgramming).Programming Manual ReferencesPC Programming Manual2.8.8 [2-6-1] Numbering Plan—Main—Features—Walking Extension2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Extension PIN2.10.17 [4-3] DSS Console—Flexible Button—Pair ExtensionPT Programming Manual[007] DSS Console Paired TelephoneUser Manual References1.12.1 Using the Same Settings as Your Previous Extension (Walking Extension)
