1.1 Incoming Call Features30 Feature Guide1.1.1.6 Intercept RoutingDescriptionProvides automatic redirection of incoming trunk and intercom calls. There are two types of InterceptRouting as follows:Intercept destinations can be assigned to extension ports.→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Intercept Destination—When calledparty does not answer—Day, Lunch, Break, Night→ 2.10.10 [4-2-1] Portable Station—Extension Settings—Main—Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ [604] Extension Intercept DestinationFeature DescriptionIntercept Routing—No Answer(IRNA)If a called party does not answer a call within a preprogrammed timeperiod (IRNA Timer), the call is redirected to the preprogrammeddestination.Intercept Routing—Busy If a called party is already handling a call, new calls are handled asfollows:– The call is redirected to the preprogrammed InterceptRouting—Busy destination.– If an Intercept Routing—Busy destination is not enabled, thecaller will hear a busy tone. However, if the call is madethrough an LCOT/ELCOT or T1 [LCOT/GCOT] card, thecaller hears a ringback tone.Intercept Routing—DND If a called party is in DND mode, the call is redirected to thepreprogrammed destination.When the original destination is: The Available Intercept Destination is:• Wired Extension (PT/SLT/T1-OPX)• PSThe destination assigned to the original extension.2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination→ Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ Intercept Destination—When Called Party isBusy2.10.10 [4-2-1] Portable Station—ExtensionSettings—Intercept Destination→ Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ Intercept Destination—When Called Party isBusy→ [604] Extension Intercept Destination
