1.1 Incoming Call FeaturesFeature Guide 17*: Enable (default); : Enable2. Distribution MethodOne of the following methods can be assigned to each trunk port:3. Destination Change with the Caller's Identification NumberThe Calling Line Identification (CLI) Distribution feature works in conjunction with the DIL/DID/DDI/MSNfeatures.BRI/PRI CO *ExtensionQSIG-Master *QSIG-Slave *IP-GW — **1 : → 1.30.1 TIE Line Service*2 : → 1.30.3 Virtual Private Network (VPN)Method Description & ReferenceDirect In Line (DIL) Directs a call to a preprogrammed single destination (e.g., theoperator).→ 1.1.1.2 Direct In Line (DIL)Direct Inward Dialling (DID) Directs a call with a DID number from a DID line to a preprogrammeddestination.DID is also known as Direct Dialling In (DDI).→ 1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)Multiple Subscriber Number(MSN) Ringing ServiceDirects a call with an MSN from an ISDN line to a preprogrammeddestination.→ 1.1.1.4 Multiple Subscriber Number (MSN) Ringing ServiceFeature Description & ReferenceCalling Line Identification(CLI) DistributionDirects a call to a CLI destination if the caller's identification numberhas been assigned in the Caller ID Table.→ 1.1.1.5 Calling Line Identification (CLI) DistributionTrunk Card Type Channel TypeNetworking TypePublic (DIL/DID/DDI/MSN) Private (TIE)* 1 Virtual PrivateNetwork (VPN)* 2
